Explanation To Customer; Maintenance - Heatrae Sadia Multipoint SS V 50 Fitting Instructions And User Manual

5.0 EXPLANATION TO USER
1. The Multipoint SS unvented heater stores water at the temperature set on
the adjustable control knob. This can be set to give temperatures in the
range 10°C to 70°C. In hard water areas it is advised that the maximum
temperature is restricted to prevent build up of scale. To avoid risk of
freezing when the heater is not in use for long periods during the winter
months, do not switch off the electrical supply and set the thermostat to
its minimum position. N.B. This will not protect other system pipework.
2. The indicator lights will be illuminated when the unit is heating.
3. To ensure the heater continues to operate at its optimum performance
it should be periodically maintained in accordance with the instructions
given under the section headed MAINTENANCE.
IMPORTANT NOTES TO USER
• DO NOT BLOCK OR RESTRICT THE DISCHARGE FROM ANY SAFETY
VALVE FITTED.
• DO NOT TAMPER WITH ANY SAFETY VALVE FITTED.
• IF WATER DISCHARGES FROM ANY SAFETY VALVE FITTED SWITCH
OFF THE ELECTRICAL SUPPLY TO THE UNIT IMMEDIATELY. CONTACT
THE HEATRAE SADIA SERVICE TEAM (TEL: 0844 8711530) OR AN
APPROVED INSTALLER. DO NOT TURN THE ELECTRICAL SUPPLY
ON AGAIN UNTIL THE UNIT HAS BEEN CHECKED AND APPROVED
BY A QUALIFIED INSTALLER.

6.0 MAINTENANCE

WARNING: DISCONNECT FROM ALL ELECTRICAL SUPPLIES BEFORE
BEGINNING ANY WORK ON THE MULTIPOINT SS. FLUID CONTAINED
IN THE CYLINDER MAY BE VERY HOT!
To ensure the continued safe and efficient operation of the Multipoint SS it
should be regularly maintained.
Maintenance should be carried out by a competent person and any replacement
parts used should be authorised Heatrae Sadia Multipoint SS spare parts.
It is recommended that maintenance is carried out annually and should include
the checks detailed in the sections on page 16 & 17.
15