Table of Contents
Advertisement
Means for disconnection from the supply mains having a con-
tact seperation in all poles that provide full disconnection under
overvoltage category III conditions is required. The instructions
shall state that means for disconnection must be incorporated
in the fixed wiring in accordance with the wiring rules.
2.0TECHNICAL SPECIFICATION
Electrical rating
Capacity
Weight (full)
Rated pressure (open outlet)
Rated pressure (max head pressure cistern fed) 0.2 MPa (2 bar)
Minimum recommended supply pressure
Supplier's name or trade mark
Supplier's model identifier
Storage volume V in litres
Mixed water at 40°C V40 in litres
The declared load profile
The water heating energy efficiency class of the model
The water heating energy efficiency in %
The annual electricity consumption in kWh
Daily fuel consumption Q fuel in kWh
The thermostat temperature settings of the water heater, as placed
on the market by the supplier
Specific precautions that shall be taken when the water heater is
assembled, installed or maintained and disposed of at end of life
Table 2: Technical parameters in accordance with European Commision
regulations 814/2013 and 812/2013
The HWA Charter Statement requires that all members adhere to the
following:
To supply fit for purpose products clearly and honestly described.
`
To supply products that meet, or exceed appropriate standards and
`
building and water regulations.
To provide pre and post sales technical support.
`
To provide clear and concise warranty details to customers.
`
1.5kW@240V~ or 3kW@240V~ 50Hz.
15 litres
23.4kg
0 MPa (0 bar)
0.04 MPa (0.4 bar)
UTC
10L
10.0
16
XS
C
32.3
570
2.75
60°C
See Section 2 to 7
15L
15.0
25
XS
D
29.2
631
3.10
3
Advertisement
Table of Contents
