To Activate/Deactivate; To Set A Desired Acc Speed; To Cancel - Dodge Challenger 2015 Operating Information Manual

Hide thumbs Also See for Challenger 2015:
Table of Contents

Advertisement

• When the parking brake is set.
• When the automatic transmission is in
PARK, REVERSE or NEUTRAL.
• When the Vehicle speed is outside of the
speed range.
• When the brakes are overheated.

To Activate/Deactivate

Push and release the Adaptive Cruise Control
(ACC) ON/OFF button. The ACC menu in the
DID displays "ACC Ready."
Adaptive Cruise Control Ready
To turn the system OFF, push and release the
Adaptive Cruise Control (ACC) ON/OFF button
again. At this time, the system will turn off and
the DID will display "Adaptive Cruise Control
(ACC) Off."
Adaptive Cruise Control Off
WARNING!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous. You
could accidentally set the system or cause it
to go faster than you want. You could lose
control and have a collision. Always leave
the system off when you are not using it.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired,
push the SET + button or the SET - button and
release. The DID will display the set speed.
If the system is Set when the vehicle speed is
above 19 mph (30 km/h), the Set Speed shall
be the current speed of the vehicle.
Remove your foot from the accelerator pedal. If
you do not, the vehicle may continue to accel-
erate beyond the set speed. If this occurs:
• The message "DRIVER OVERRIDE" will dis-
play in the DID.
• The system will not be controlling the dis-
tance between your vehicle and the vehicle
ahead. The vehicle speed will only be deter-
mined by the position of the accelerator
pedal.

To Cancel

The following conditions cancel the system:
• The brake pedal is applied.
• The CANCEL button is pressed.
91

Advertisement

Table of Contents
loading

Table of Contents