Tire Service Kit Usage Precautions - Dodge Challenger 2015 Operating Information Manual

Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the fol-
lowing symbols to indicate the air or sealant
mode.
Selecting Air Mode
Push in the Mode Select Knob (5)
and turn to this position for air
pump operation only. Use the
Black Air Pump Hose (7) when
selecting this mode.
Selecting Sealant Mode
Push in the Mode Select
Knob (5) and turn to this
position to inject the Tire
Service Kit Sealant and
to inflate the tire. Use
the Sealant Hose (clear
hose) (6) when select-
ing this mode.
Using The Power Button
Push and release the Power But-
ton (4) once to turn On the Tire
Service Kit. Push and release the
Power Button (4) again to turn Off
the Tire Service Kit.
Using The Deflation Button
Press the Deflation Button (2) to
reduce the air pressure in the tire if
it becomes over-inflated.

Tire Service Kit Usage Precautions

• Replace the Tire Service Kit Sealant Bottle
(1) and Sealant Hose (6) prior to the expira-
tion date (printed at the lower right hand
corner on the bottle label) to assure optimum
operation of the system. Refer to "Sealing a
Tire with Tire Service Kit" section (F) "Sealant
Bottle and Hose Replacement".
Tire Service Kit Expiration Date Location
• The Sealant Bottle (1) and Sealant Hose (6)
are a one tire application use and need to be
replaced after each use. Always replace
these components immediately at your origi-
nal equipment vehicle dealer.
• When the Tire Service Kit sealant is in a
liquid form, clean water, and a damp cloth will
remove the material from the vehicle or tire
and wheel components. Once the sealant
dries, it can easily be peeled off and properly
discarded.
247