Table of Contents
Advertisement
NOTE:
In Sync mode, this button will also automati-
cally adjust the passenger temperature set-
ting at the same time.
14. Driver Temperature Control Up Button
(Uconnect® 8.4 Only)
Provides the driver with independent tempera-
ture control. Push the button on the faceplate
for warmer temperature settings or on the
touchscreen, press and slide the temperature
bar button towards the red arrow for warmer
temperature settings.
NOTE:
In Sync mode, this button will also automati-
cally adjust the passenger temperature set-
ting at the same time.
15. Temperature Control (Uconnect® 5.0
Radio Only)
Press the temperature button on the touch-
screen to regulate the temperature of the air
inside the passenger compartment. Moving the
temperature bar into the red area, indicates
warmer temperatures. Moving the temperature
bar into the blue area indicates cooler tempera-
tures.
Climate Control Functions
A/C (Air Conditioning)
The Air Conditioning (A/C) button allows the
operator to manually activate or deactivate the
air conditioning system. When the air condition-
ing system is turned on, cool dehumidified air
will flow through the outlets into the cabin. For
improved fuel economy, press the A/C button to
turn off the air conditioning and manually adjust
the blower and airflow mode settings. Also,
make sure to select only Panel, Bi-Level or
Floor modes.
NOTE:
• For Manual Climate Controls, if the sys-
tem is in Mix, Floor or Defrost Mode, the
A/C can be turned off, but the A/C system
shall remain active to prevent fogging of
the windows.
• If fog or mist appears on the windshield or
side glass, select Defrost mode and ad-
just blower speed if needed.
• If your air conditioning performance
seems lower than expected, check the
front of the A/C condenser (located in
front of the radiator), for an accumulation
of dirt or insects. Clean with a gentle
water spray from behind the radiator and
through the condenser. Fabric front fas-
cia protectors may reduce airflow to the
condenser, reducing air conditioning per-
formance.
MAX A/C
MAX A/C sets the control for maximum cooling
performance.
Press and release to toggle between MAX A/C
and the prior settings. The button on the touch-
screen illuminates when MAX A/C is ON.
In MAX A/C, the blower level and mode position
can be adjusted to desired user settings. Press-
ing other settings will cause the MAX A/C
operation to switch to the prior settings and the
MAX A/C indicator will turn off.
171
Advertisement
Chapters
Table of Contents
