Installing Options - Procomp BIW2A User Manual

BIW2A User' s Manual
20
1. Make sure the computer is turned off and un-
plugged.
2. Press down on the retaining latches to release
the module and push it partially out of the
socket.
3. Carefully remove the module from the socket,
preferably grasping it by the top corners of the
circuit board.

Installing Options

To install any optional hardware such as the TV-
Out port bracket, the Modem Riser card or op-
tional Infrared port you must first install the
motherboard in a system housing. Please refer to
the Other Connections portion of the next section.