Table of Contents
Advertisement
GS-SR195H Rack Mount Server
Main
Advanced
PCI Configuration
Advanced Chipset Control
Advanced Processor Options
Peripheral Configuration
Reset Configuration Data
ClkGen Spread Spectrum
System After AC Back
Extended Memory Testing
Network Server
F1: Help
: Select Item
Esc: Exit
: Select Menu
Reset Configuration Data
Yes
Clear the Extended System Configuration Data (ESCD) area.
No
Disable this function. (default value)
Clk Gen Spread Spectrum
Enabled
Enable ClkGen Spread Spectrum.
Disabled
Disabled this function. (Default value)
System After AC Back
Set the mode od operation if an AC/Power loss occurs.
Power On
Power on system without pressing power button.
Stay Off
Keep the power off until the power button is pressed.
Pre- State
Set system to the last sate when AC power is removed. Do not power on
system when AC power is back. (Default value)
PhoenixBIOS Setup Utility
Security
Server
Boot
[No]
[Disabled]
[Pre-State]
[Enabled]
[Enabled]
+ -: Change Values
Enter: Select
Sub-Menu
Figure 2: Advanced
4 3
Exit
Item Specific Help
F9: Setup Defaults
F10: Save&Exit
Advertisement
Table of Contents
