Force Compliance Mode
This option allows user to function PCI-E Compliance mode by setting item to desired value.
Enabled
Disabled
PCI-E port A Device 2
Force PCI Express v1.0 Compability Mode, this PCI-E port A by setting to desired value.
Force PCI Express 1.0
Enabled
Disabled
4GB PCI Hole Granularity
Select the granularity of PCI hole for PCI resource. If MTRRS are not enough, we may use this
option to reduce the MTRR occupation.
128MB
256MB
Data Parity Error Recovery
Enabled
Disabled
Wake On LAN
This option allow user to determine the action of the system when a LAN wake up occurs.
Enabled
Disabled
Note: This item must enabled if you're running under Windows operating system.
Enables PCI-E Force Compliance mode. (Default Value)
Disables this function.
Force PCI Express v1.0 Compability Mode.
Enables PCI-E port A Device2 (Default Value)
Disables this function.
Select 128MB as granularity of PCI hole. (Default value)
Select 256MB as granularity of PCI hole.
Enable data parity error recovery function. (Default vaules)
Disable this function.
Enable Wake On LAN. (Default value)
Disable this function.
3 7
BIOS Setup