Table of Contents
Advertisement
NAV* menu
The
Nav
menu contains the functions
needed to operate your navigation system.
Press button è or ÿ repeatedly
until the message
appears in the
Nav
multifunction display.
If the navigation system is switched off,
the message
Nav off
appears in the
multifunction display.
If the navigation system is on, different
messages, depending on the current
state of the navigation system, appear
in the multifunction display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
Vehicle status message memory menu
Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the
system. Such messages appear in the
multifunction display and are based on
conditions or system status the vehicle's
system has recorded.
Warning!
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner's
and/or driver's responsibility to maintain
the vehicle's operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages ( page 363).
Controls in detail
Press button è or ÿ repeatedly
until the vehicle status message
memory appears in the multifunction
display.
No vehicle status messages
If no conditions are recorded in memory,
the message in the multifunction display
is:
No Malfunction
G
Vehicle status messages have been
recorded
If conditions have occurred causing status
messages to be recorded, the number of
malfunctions appears in the multifunction
display:
1 Number of malfunctions
Control system
141
Advertisement
Table of Contents
