Table of Contents
Advertisement
Warning!
If the indicator lamp in the SOS button is
flashing continuously and there was no
voice connection to the Response Center
established, then the Tele Aid system could
not initiate an emergency call (e.g. the rele-
vant cellular phone network is not available).
The message Call failed appears in the
multifunction display for approximately
ten seconds.
Should this occur, assistance must be
summoned by other means.
Initiating an emergency call manually
G
1 Cover
2 SOS button
Briefly press on cover 1.
The cover will open.
Press SOS button 2 briefly.
The indicator lamp in SOS button 2
will flash until the emergency call is
concluded.
Controls in detail
Useful features
Wait for a voice connection to the
Response Center.
Close cover 1 after the emergency
call is concluded.
Warning!
If you feel at any way in jeopardy when in the
vehicle (e.g. smoke or fire in the vehicle,
vehicle in a dangerous road location), please
do not wait for voice contact after you have
pressed the emergency button. Carefully
leave the vehicle and move to a safe loca-
tion. The Response Center will automatically
contact local emergency officials with the
vehicle's approximate location if they
receive an automatic SOS signal and cannot
make voice contact with the vehicle
occupants.
G
279
Advertisement
Table of Contents
