Nav Menu; Vehicle Status Message Memory Menu - Mercedes-Benz G 500 Operator's Manual

Controls in detail
Control system
1 MP3 mode
2 Current track
Press button k or j repeatedly
until the desired track is selected.
i Level of information displayed will vary
depending on the information contained on the
MP3-CD inserted in the single CD drive of the
COMAND system.
To select a MP3-CD from the CD changer
magazine, press a number on the COMAND
system key pad located in the center console.
144

NAV menu

The menu contains the functions
NAV
needed to operate your navigation system.
Press button è or ÿ repeatedly
until the message appears in the
NAV
multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
With the navigation system switched
off, the message
NAV off
the multifunction display.
With the navigation system switched
on but route guidance not activated,
the direction of travel and, if applicable,
the name of the street currently
traveled on appear in the multifunction
display.
With the navigation system switched
on and route guidance activated, the
direction of travel and maneuver
instructions appear in the multifunc-
tion display.
Please refer to the COMAND system
manual for instructions on how to activate
the route guidance system.

Vehicle status message memory menu

Use the vehicle status message memory
appears in
menu to scan malfunction and warning
messages that may be stored in the
system. Such messages appear in the
multifunction display and are based on
conditions or system status the vehicle's
system has recorded.
The vehicle status message memory menu
only appears, if messages have been
stored.