Nav* Menu; Vehicle Status Message Memory Menu - Mercedes-Benz SLK 350 Operator's Manual

Controls in detail
Control system

NAV* menu

The NAV menu contains the functions need-
ed to operate your navigation system.
Press button è or ÿ repeatedly
until you see the message NAV
multifunction display.
If the navigation system is switched
off, the message NAV off
in the multifunction display.
If the navigation system is on, dif-
ferent messages, depending on the
current state of the navigation sys-
tem, appear in the multifunction
display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system.
126

Vehicle status message memory menu

Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the sys-
tem. Such messages appear in the multi-
in the
function display and are based on
conditions or system status the vehicle's
system has recorded.
is shown
Warning!
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner's
and/or driver's responsibility to maintain
the vehicle's operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages ( page 348).
Press button è or ÿ repeatedly
until the vehicle status message mem-
ory appears in the multifunction dis-
play.
No vehicle status messages
If no conditions are recorded in memory,
the message in the multifunction display
is: No Malfunction .
G
Vehicle status messages have been
recorded
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction dis-
play:
1 Number of messages