Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2005 CLK-Class Cabriolet Operator's Manual

Controls in detail
Memory function
The memory button and memory position
switch are located on the door.
1 Memory button
2 Memory position switch
Switch on the ignition ( page 34).
or
Open the respective door and insert
the SmartKey in the starter switch.
120

Storing positions into memory

Adjust the seats, steering wheel and
exterior rear view mirrors to the
desired position ( page 37).
Turn memory position switch 2 to the
desired memory position.
Press memory button 1.
Release memory button 1 and press
memory position switch 2 within
three seconds.
All settings are stored to the selected
position.

Recalling positions from memory

!
Do not operate the seats using the
memory button if the seat backrest is
in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
First move the seat backrest to an
upright position.
Turn memory position switch 2 to the
desired memory position.
Press and hold memory position
switch 2 until the seat, steering wheel
and exterior rear view mirrors have
completely moved to the stored
positions.
i
Releasing the memory position switch
stops movement to the stored
positions immediately.