Practical hints
Unlocking/locking in an emergency
Manually unlocking the gear selector
lever
In case of power failure, the gear selector
lever can be manually unlocked, e.g. to tow
the vehicle.
Open the storage compartment under
the center armrest ( page 270).
Take out storage box 1.
Insert a pin into the opening of the divi-
sion and pry the division out.
400
Insert a tool 2 (e.g. flade blade screw-
driver) into the opening.
Perform the following two steps simul-
taneously:
Press tool 2 forward in the
direction of the arrow.
Move selector lever from
position P.
Reinstall the division and storage
box 1 after removing the tool 2 from
the opening.
i
The gear selector lever is locked again
when moving it to position P.