Table of Contents
Advertisement
Instrument cluster submenu
Access the
Instr. cluster
submenu via
the
Settings
menu. Use the
Instr. clus-
ter
submenu to change the instrument
cluster display settings.
The following functions are available:
Function
Selecting temperature display
mode
Selecting speedometer display
mode
Selecting language
Selecting display (speed display
or outside temperature) for the
status line
Selecting display (speed display
or outside temperature) for
standard display
Selecting temperature display mode
Move the selection marker with
button æ or ç to the
Instr. cluster
submenu.
Press button j or k repeatedly
until the message
appears in the multifunction display.
Page
The selection marker is on the current
145
setting.
145
146
146
Press button æ or ç to set tem-
perature unit to
°C
147
or
(degrees Fahrenheit).
°F
Selecting speedometer display mode
Move the selection marker with
button æ or ç to the
Instr. cluster
Press button j or k repeatedly
until the message
Temp. indicator
Speed-/odometer
function display.
The selection marker is on the current
setting.
Press button æ or ç to set
(degrees Celsius)
speedometer unit to
Controls in detail
Control system
submenu.
Display unit
appears in the multi-
or
.
km
miles
145
Advertisement
Table of Contents
