Elation Color Tone 50 User Instruction page 22

Table of Contents

Where "XXXX "represents the total number of running hours. This time is none

destructive and will remain in the fixtures memory indefinitely. Use this time to track

rentals or show durations.

<CODE> Clear run time access code

This lock-out code prevents the current run time from being erased accidently. The

access code is "038"

<CLFE> Clear Fixture Run Time

This function resets the run time to zero.

"Edit" Internal Program Settings:

The fixture comes equipped with a built-in DMX recorder that allows custom programs to

be installed and recalled directly from the fixture's control board. Programs can be

created and stored using the fixture's control board or by using an external DMX

controller. For detailed instructions on how to complete this task please see "Working

with Built-In Programs" Section 11/ Page 27.

Select program – This function allows the user to select one of ten of the user

defined built-in programs. This program is then accessed in "Function Mode" under

"Program Run."

Edit program – This function allows the user to edit the built-in programs.

Edit Scenes – This function allows the user to edit or define the actual scenes that

are stored in the user defined built-in programs that are accessed in the previous

step.

Color Tone 50™

Table of Contents