Elation Color Tone 50 User Instruction page 24

Controller Settings: (assuming the fixture is addressed at 001)
1. Set the DMX value of channel 1 to a value of 7.
2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is
set to "7" you can adjust the starting address between 1 and 255. When
set to "8" you can adjust the starting address between 256 and 511.
3. Use channel 3 to set your desired DMX starting address. For example: If
you want to set the starting address to 57, set channel 1 to a value of "7,"
set channel 2 to a value of "7" and use channel 3 to set your address to
57 by selecting a channel value of 57. Example 2: If you want to set the
starting address to 420, set channel 1 to a value of "7," channel 2 to "8"
and channel 3 to "164" (256+164=420).
4. The above example assumes the fixture is addressed at 001, for any
other address follow the above instruction for the actual staring address
in place of 1. . For example: If you want to set the starting address to 57,
when the starting address is set at 163. Set channel 163 to a value of "7,"
set channel 164 to a value of "7" and use channel 165 to set your address
to 57 by selecting a channel value of 57.
5. Wait for approximately 20 seconds for the unit to complete the
address reset function.
©Elation Professional® 24
Color Tone 50™
Color Tone 50™