Elation Color Tone 50 User Instruction page 26

the last fixture.
 For the unit functioning as the "Master" unit follow the same procedures
listed in the previous Stand-Alone section.
 For the "Slave" units, access the "Set To Slave" settings in the "Function
Mode" menu and assign each slave fixture a designation (Slave 1, Slave 2,
Slave 3...etc).
10.3 Universal DMX Control: This function allows you to use a universal DMX-512
controller such as the Elation® Show Designer 2™ or Elation® Show Designer 3™ to
control head movement, the color wheel, the shutter (strobe), and all other DMX traits.
A DMX controller allows you to create unique programs tailored to your individual
needs. The Color Tone 50™ uses up to 7 DMX channels. See page 30 for detailed
description of the DMX traits. To control your fixture in DMX mode, follow the set-up
procedures on pages 13-16 as well as the set-up specifications that are included with
your DMX controller. Use the controller's faders to control the various DMX fixture traits.
This will allow you to create your own programs.
 Follow the instruction on page 23 to set the DMX address.
 Be sure to use a terminator on the last fixture, especially for longer cable
runs (more than a 100 feet).
 For help operating in DMX mode, consult the manual that was included with
your DMX controller.
©Elation Professional® 26
Color Tone 50™
Color Tone 50™