Elation Color Tone 50 User Instruction page 21

<FAIL> DMX Fault Protection
This function dictates how the fixture will operate in the event DMX signal is
suddenly lost while operating in DMX mode. The three fail safe modes are; 1) "OFF"
which will blackout all light output. 2) "HOLD," which will hold the last DMX command,
or 3 "AUTO," which will put the fixture in sound-active mode.
<DFSE> - Restore Default
This function is used to restore the factory settings of the device. All settings will be
set back to the default values (shaded). Any edited scenes will be lost.
<VER> Software Version
This function will display the current firmware version.
"MANL" – Manual Fixture Settings:
This function allows the each of the ten DMX channels to be controlled manually. This
will allow the fixture to be preset to a specific color or built-in program without the use of
a DMX console.
1. Select "MANL" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "RED", "GREN" , "BLUE" , "TEMP" , "PROG" ,
"STRB" , "DIMM".
3. Press [UP] or [DOWN] button to select "RED," "GREN," "BLUE," "TEMP,"
"PROG," "STRB," or "DIMM."
4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
"TIME" – Operating Hours
These functions will detail different time functions associated with the fixture.
<LIFE> (0000~9999 Hours)
This function tracks the running time of the fixture from the point it was last cleared.
©Elation Professional® 21
Color Tone 50™
Color Tone 50™