Jump-Starting - BMW F 800 GT Rider's Manual

Installing centre trim
panel
Slip the centre trim panel un-
derneath the left and right side
panels at position 1 and then
seat it in guides 2 on left and
right.
ATTENTION
Missing plastic washer for
painted components.
Paint damage
Install plastic washers under-
neath the screw heads.
Install four screws 1 on left and
right.
Trim panels
2 Nm
Install the seat ( 54).

Jump-starting

ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle.
Risk of short-circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
8
111
z