Front-Wheel Stand; Installing The Rear Wheel - BMW F 800 GT Rider's Manual

Installing the rear wheel

8
WARNING
102
Use of a non-standard wheel.
Malfunctions in operation of ABS.
See the information on the
effect of wheel size on the
ABS system at the start of this
chapter.
ATTENTION
Tightening threaded fasten-
z
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Seat the rear wheel on the
rear-wheel adapter.
Tighten screws 1 to specified
torque in diagonally opposite
sequence.
Rear wheel to drive shaft
Tightening sequence: tighten
in a crosswise sequence
60 Nm
without centre stand OE
Remove the auxiliary stand.

Front-wheel stand

Installing the front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without
also accompanying use of
auxiliary stand.
Risk of damage to parts if vehicle
topples.
Place the motorcycle on an
auxiliary stand before lifting
the front wheel with the
BMW Motorrad front-wheel
stand.
Place the motorcycle
on an auxiliary stand;
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Installing the rear-wheel stand
( 104).