Deactivation - BMW F 800 GT Rider's Manual

control. This function does not
change the status of the anti-
theft alarm.
While an alarm is in progress an
alarm tone sounds and the turn
indicators flash. You can program
the type of alarm tone.
Reason for an alarm
Once you have deactivated the
alarm function, the anti-theft
alarm LED is active for a period
of one minute to show you reas-
ons for alarms, if any, that were
triggered in your absence:
Flashes 1x: Motion sensor;
motorcycle was rocked forward/
back
Flashes 2x: Motion sensor;
motorcycle was rocked to the
side
Flashes 3x: Ignition switched
on with unauthorised key
Flashes 4x: Disconnection of
the anti-theft alarm from the
vehicle's battery
Information on alarm
triggering
If an alarm was triggered after
the last activation of the alarm
function, the rider is notified
accordingly by an alarm tone
sounding once when the ignition
is switched on.

Deactivation

with alarm system (DWA)
Deactivating alarm
function
OE
Press button 1 on the remote
control once or switch on the
ignition with an authorised key.
NOTICE
Note that you can deactivate the
alarm function with the ignition
key only when the kill switch is in
the RUN position.
NOTICE
If the alarm function is deactiv-
ated by the remote control and
5
61
z