Energy Saving - Ricoh M016 Service Manual

7. ENERGY SAVING

7.1 ENERGY SAVE
7.1.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the
environment.
The backlight of the screen is turned off and "Energy Saver Mode1" appears on the screen,
and then the fusing lamp is turned off and "Energy Saver Mode2" appears on the screen.
The area shaded grey in this diagram represents the amount of energy that is saved when
the timers are at the default settings. If the timers are changed, then the energy saved will
be different. For example, if the timers are all set to 240 min., the grey area will disappear,
and no energy is saved before 240 min. expires.
Timer Settings
The user can set these timers with User Tools (Menu > Admin Settings > Power Saver >
Energy Saver Mode1 or Mode2)
Energy Saver Mode1 (30 sec.): This can be only turned on or off.
Energy Saver Mode2 (1 to 240 min.): This can be turned on or off and timer setting is
adjustable (default: 1min.).
SM 7-1
Energy Save
M016/M017