Ricoh M016 Service Manual page 117

Engine Maintenance
Horiz. Dup. Back
Vert. Dup. Plain
Paper
Vert. Dup. Thin
Registration
Paper
Vert. Dup. Thick
Paper
00* – 7F
Brand ID Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
Fuser SC
This button is for resetting an SC related with the fusing errors.
Reset
Bypass Tray Turns on or off the paper priority feeding from the bypass tray.
Priority [On or Off]
SM
Adjusts the horizontal registration the back side in
duplex mode. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of plain paper for the
back side in duplex mode. If the machine settings
are reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thin paper for the
back side in duplex mode. If the machine settings
are reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thick paper for the
back side in duplex mode. If the machine settings
are reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
5-5
Service Program Mode
M016/M017