DEVELOPMENT MOTOR & TONER SUPPLY CLUTCH REPLACEMENT 14 August 1997
9.2 DEVELOPMENT MOTOR & TONER SUPPLY CLUTCH
REPLACEMENT
[A]
[G]
A217R507.cdr
[B]
[D]
[F]
[E]
[D]
[C]
A217R508.cdr
1. Turn off the main switch and unplug the machine.
2. Remove the rear cover.
3. Remove the HDD unit (see HDD unit replacement).
4. Swing out the SCU board plate [A] (4 screws).
5. Remove the fly wheels [B] (3 screws).
6. Remove the drive gear holder [C] (2 screws).
7. Remove 2 bushings [D], 1 gear [E], and 1 shaft [F].
NOTE: The bushings drop easily.
8. Remove the fan motor [G] (2 screws, 1 connector).
44