Ricoh A217 Service Manual page 41

SP MODE
Mode No.
Class 1 Class 2
For details on the correct way to use SP 6006, see the ADF service manual.
6009
6105 *
6107
7004
7804
7807
7808
7810
7901 1
2
Use the / key to toggle between +
and -.
ADF Free Run Performs an ADF free run.
This is a general free run controlled
from the copier. For more detailed
free run modes, see the DF manual.
Finisher Staple Adjusts the staple position when
Position using the finisher.
Adjustment
Use the / key to toggle between +
and -.
One staple position: A larger value
causes the staple position to shift
inward.
Two staple position: A larger value
causes both staple positions to shift
to the rear side of the machine.
Finisher Free Performs a finisher free run (without
Run stapler).
This is a general free run controlled
from the copier. For more detailed
free run modes, see the finisher
manual.
Total Copy Japanese version only.
Counter Reset
Do not change this value.
PM Counter Resets the PM counter.
Reset
SC/Jam Counter Resets the SC and jam counters.
Reset
Resets Resets the following counters:
Counters On the data list, between "Total No of
(except for the Org from ADF" and "Number of SCs:
total counter) Others", and between "Counter from
ADF" and "Staple Mode".
User Code Resets the user code numbers.
Number Reset
ROM/CPU Displays the operation panel board
Version ROM version.
(Operation
Panel)
ROM/CPU Displays the ROM version for the
Version MSIS on the SCU board.
(MSIS)
Function
38
14 August 1997
Settings
- 1~ +3.5
0.5 mm/step
+0.0 mm
To see the
current
counter
values, print
the SP mode
data lists (SP
5990).