Ricoh A217 Service Manual page 40

14 August 1997
Mode No.
Class 1 Class 2
5990 1
2
3
4
6006 * 1 *
6006 * 2 *
3 *
4 *
If a low temperature is selected, it
takes more time to reach the ready
condition.
SP Mode Data Prints all the system parameter lists.
Printing See the "SYSTEM PARAMETER
(All Data) AND DATA LISTS" section for how to
print the lists.
Printing takes 6 minutes.
SP Mode Data Prints the SP mode data list.
Printing See the "SYSTEM PARAMETER
(SP Mode Data) AND DATA LISTS" section for how to
print the lists.
Printing takes 2 minutes.
SP Mode Data Prints the UP mode data list.
Printing See the "SYSTEM PARAMETER
(UP Mode Data) AND DATA LISTS" section for how to
print the lists.
Printing takes 2 minutes.
SP Mode Data Prints the machine status history
Printing data list.
(Machine Status See the "SYSTEM PARAMETER
Data) AND DATA LISTS" section for how to
print the lists.
Printing takes 2 minutes.
ADF Side-to Adjusts the printing side-to-side
Side registration in the ADF mode.
Registration
Use the / key to toggle between +
and -.
ADF Leading Adjusts the original stop position.
Edge
Registration
(Simplex)
Use the / key to toggle between +
and -.
ADF Leading Adjusts the original stop position
Edge against the original left scale in one-
Registration sided original mode.
(Duplex-front)
Use the / key to toggle between +
and -.
ADF Leading Adjusts the original stop position
Edge against the original left scale in two-
Registration sided original mode.
(Duplex-rear)
Function
37
SP MODE
Settings
-3 ~ +3
0.1 mm/step
+ 0.0 mm
-3 ~ +3
0.1 mm/step
+ 0.0 mm
-3 ~ +3
0.1 mm/step
+ 0.0 mm
-3 ~ +3
0.1 mm/step
+ 0.0 mm