Table of Contents
Advertisement
14 August 1997
Mode No.
Class 1
Class 2
5106 *
5118 *
5220 *
5305
5501 *
1
2
5801
5802
ADS Level
Selects the image density level that
Selection
is used in ADS mode.
Disable Copying
Selects whether the copy function is
disabled or not.
Auto Stamp
Selects whether the auto stamp
Function
function is enabled or not.
Auto Off Mode
This SP mode is used only for
115V machines (Energy Star
standardization).
Selects whether the auto off timer
setting is enabled or disabled
When "disabled" is selected, the auto
off timer range will be wider than the
default timer range. (In UP mode, the
user will be able to select a time
between 0 and 120 minutes.) If "0" is
selected, the auto off timer function is
disabled.
PM Alarm
Selects whether the PM alarm is
enabled or not.
PM Alarm
Sets the PM interval, with an alarm.
Interval
When the setting is "0", this function
is disabled.
Memory All
Resets all correction data for process
Clear
control and all software counters.
Also, returns all modes and
adjustments to the default settings.
See the "MEMORY ALL CLEAR"
section for how to use this SP mode
correctly.
Normally, this SP mode should not
be used.
It is used only after replacing the
NVRAM, or when the copier
malfunctions due to a damaged
NVRAM.
Free Run
Performs a free run. The scanner
scans once and the printer prints for
the number of copies requested.
Function
35
SP MODE
Settings
1 ~ 7
1 notch /step
4
No
Yes
On (115V
machine)
Off (230V
machine)
Enabled
Disabled
Enabled
Disabled
0 ~ 255
1k copies/step
120 k copies
Advertisement
Table of Contents
