FUSING TEMPERATURE CONTROL
7. INSTALLATION PROCEDURE
The installation procedure of this machine is completely the same as for the A133
machine except for the followings.
1. Do the following step after step 31 of the installation procedure for the A133
machine.
32. Attach the sponge [A] to the LCT as shown above illustration.
2. When the machine is installed in France, do the following step after step 35 of
the installation procedure for the A133 machine.
- France Only
36. Change switch. 8 of DIP SW 201 on the BCU to "ON".
A217I524.CDR
18
14 August 1997
[A]