Ricoh A217 Service Manual page 25

SP MODE
Mode No.
Class 1 Class 2
2101 * 2 *
3 *
4 *
2103 *
2201 * 1 *
2 *
2207
2208 * 1 *
The specification is 3
"Replacement and Adjustment -
Copy Image Adjustments" for details
on SP2101.
Trailing Edge Adjusts the trailing edge erase
Erase Margin margin.
(Printing)
The specification is 2
Left Side Edge Adjusts the left side erase margin.
Erase Margin
(Printing)
The specification is 2
Right Side Edge Adjusts the right side erase margin.
Erase Margin
(Printing)
The specification is 2
LD Power Adjusts the LD power.
Adjustment
Do not change the value.
Development Adjusts the development bias during
Bias Adjustment copying.
(for copying)
This can be adjusted as a temporary
measure if faint copies appear due to
an aging drum.
Development Adjusts the development bias when
Bias Adjustment making the ID sensor pattern.
(for ID sensor
pattern)
This can be adjusted as a temporary
measure if faint copies appear due to
an aging drum.
Forced Toner Forces the toner bottle to supply
Supply toner to the toner supply unit for 30
seconds.
Toner supply finishes automatically
after 30 seconds. This process is not
normally needed in the field for this
model. At installation, doing the 50-
page free run also supplies toner to
the development unit.
Toner Supply Selects the toner supply mode.
Mode
Use fixed supply mode only as a
temporary measure if process control
is not working.
Function
r
2 mm. See
r
2 mm.
r
1.5 mm.
+ 2 5 .
- 15 .
22
14 August 1997
Settings
0.0 ~ 9.0
0.1 mm/step
2.0 mm
0.0 ~ 9.0
0.1 mm/step
2.0 mm
0.0 ~ 9.0
0.1 mm/step
2.0 mm
mm.
-127 ~ +127
2
2.1 W/step
+0
200 ~ 700
1 V/step
550 V
200 ~ 700
1 V/step
310 V
Detect
Fixed