Table of Contents
Advertisement
SP MODE
Mode No.
Class 1
Class 2
3
4
5
6
4911
7
5019
5104 *
HDD Setting
Decides the disk drive motor (spindle
(Spindle
motor) stop timing.
Control)
Yes: The hard disk stops in low
power mode. The first copy after
returning to standby will take longer.
No: The hard disk keeps going in low
power mode
HDD Setting
Press Enter to move the head of the
(Head
hard disk away from the disk while
Retraction)
the disk is turning. The head
automatically moves back when a
copy is made.
This SP should be performed when
the machine will be moved without
turning the main switch off.
HDD Setting
Input the total storage capacity of the
(Total Storage
hard disk at replacement.
Capacity)
In future, hard disks of various sizes
may be available. In this case, use
this SP mode when installing a new
disk.
HDD Setting
Resets the bad sector information
(Bad Sector
which is stored in the E
Information
the EX-IPU board.
Reset)
This SP should be performed when
the hard disk is replaced.
HDD Setting
Displays the number of bad sectors
(Bad Sector
there are on the hard disk.
Display)
LCT Paper Size
Selects the paper size for the LCT.
Setting
When changing the setting, the
position of the side fences for the
LCT should be changed.
A3/11"x17"
Specifies whether the counter is
Double Count
doubled for A3/11"x17" paper.
If "YES" is selected, the total counter
and the current user code counter
counts up twice when A3/11"x17"
paper is used.
Function
2
PROM on
34
14 August 1997
Settings
A4 (230V
machines)
8 1/2" X 11"
(115V
machines)
No
Yes
Advertisement
Table of Contents
