Sw Version Be 300 And Nz 300, Programming Date - Bosch BE 300 LSN User Manual

Use of menus

SW version BE 300 and NZ 300, programming date

Note: The menus explained on this page can be used without
a user code or in coded mode (refer to chapter "Notes on
menu use").
1.
Press the "Menu" key. The first menu appears on the display.
0
Menu
2.
Use the paging keys to scroll up and down through the menus.
Select the "SW version BE 300" or
"SW version NZ 300" or "Programming date" menu.
3.
Press the "OK" key.
OK
.
Menu
View detector
Menu
SW version NZ 300
SW version NZ 300
V 1.2 15.04.01
4.
Press the "Escape" or "Clear" key.
The "Escape" key takes you back one step. Further operations
are then possible.
or
Quit the menu or coded mode with the "Clear" key. The
standby image appears on the display.
Clear
28
NZ 300 LSN
BOSCH