Walktest - Bosch BE 300 LSN User Manual

Walktest

1.
Press the "Walktest" key.
7
Walktest
2.
Enter the user code and confirm your entry with the "OK" key.
All disarmed user areas are included in the walktest. If the
walktest is not completed within 15 min, it is automatically
terminated.
OK
3.
Trigger all detectors of the areas. This is shown on the display
and entered in event log.
Walktest
Code ?
Walktest
Active 15 min
Walk ∑ = 12
Detector 012
4.
Press the "OK" key. You see how much time remains for the
walktest.
OK
5.
Press the "Escape" or "Clear" key.
The "Escape" key takes you back one step. Further operations
are then possible.
or
Quit coded mode with the "Clear" key. The standby image ap-
pears on the display.
Clear
32
Walktest
Active 8 min
NZ 300 LSN
BOSCH