Fixture Menu - Elation Spot 250 User Manual

Elation professional lamp user manual
Hide thumbs Also See for Spot 250:
Table of Contents

Advertisement

9. FIXTURE MENU

On-Board System Menu: The DESIGN SPOT 250™ comes with an easy to navigate
system menu. This next section will detail the functions of each command in the system
menu.
LED Control Panel: The control panel located on the top, front of the fixture allows you to
access the main menu and make all necessary adjustments to the Design Spot 250™.
During normal operation, tapping the "MODE/ESC" key once will access the fixture's main
menu. Once in the main menu you can navigate through the different functions and access
the sub-menus with the Up and Down buttons. Once you reach a field that requires
adjusting, tap the ENTER button to activate that field and use the UP and Down button to
adjust the field. Tapping the Enter button once more will confirm your setting. Once a
setting is saved the LED will briefly readout PASS to confirm a new setting has been made
and locked into memory. You may exit the main menu at any time without making any
adjustments by tapping the MODE/ESC button.
MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front
of the unit. Press this button to activate the system menu. Tap the UP button until you reach
the function you wish to change. When you reach the function you wish to change tap the
ENTER button once to select that menu function. When a function is selected the menu will
begin to flash, use the UP or DOWN button to change the function. Once your changes are
made tap the ENTER button yet again to lock the change in the system menu. To exit
without making any changes tap the MODE/ESC button.
Default settings shaded.
1
ADDR
AXXX A001
2
TEST
T-01~T-XX
RUN
AUDI
3
PLAY
AUTO
©Elation Professional®
MSTR/ALON
MSTR/ALON
OFF/ RUN / AUDI
21
Indicate the staring DMX address
A001 also is the setting for slave
Automatically test the function
Runs the fixture as a "master" unit or in
"stand-alone" in auto mode
Runs the fixture as a "master" unit or in
"stand-alone" in audio mode
Runs fixture in "AUTO" when running to
the user installed programs (see page
"Edit Menu on page 36)
Design Spot 250™
Design Spot 250™

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Design spot 250

Table of Contents

Save PDF