Ricoh C9100 User Manual page 88

6. Information for This Machine
• The default period the machine waits before entering Low Power mode is 15 minutes. This
default time can be changed.
Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 59 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
•
Reduced electrical consumption in Low
Power mode
Time of switch into Low Power mode
Time of switch out from Low Power
*1
mode
Reduced electrical consumption in
Sleep mode
Time of switch into Sleep mode
Time of switch out from Sleep mode
Duplex Function
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used
with) a duplex tray and the duplex function is enabled as an option.
•
Reduced electrical consumption in Low
Power mode
Time of switch into Low Power mode
86
(mainly Europe and Asia)
*1
*1
*2
(mainly North America)
*1
Type 1
419.8 W
15 minutes
160 seconds
2.0 W
59 minutes
*1
540 seconds
Standard
Type 1
425.4 W
15 minutes
Type 2
421.5 W
15 minutes
160 seconds
2.0 W
59 minutes
540 seconds
Standard
Type 2
455.6 W
15 minutes