Accessing The Trip Data From The Memory; Bike Selection: Bike 1 Or Bike 2 - VDO Cyclecomputing M6 User Manual

Accessing the trip data from the memory

The M6 can store data from 10 trips.
This data can be accessed at any time.
How to access the trip data:
Press and hold the SET button until the menu opens:
Once the menu has opened "Memory" appears on the
display.
Press the SET button to open the memory.
Press the BIKE or TPC button to scroll through the 10 stored
trips.
Press the SET button to open the desired trip.
Press the BIKE or TPC button to scroll through the trip data.
Press and hold the SET button to return to function mode.

Bike selection: bike 1 or bike 2

The VDO M6 has an automatic bike recognition function.
The digital data from the speed transmitter also informs the
VDO M6 of whether bike 1 or bike 2 is currently being used.
The total data is correspondingly stored for bike 1 or bike 2.
ATTENTION:
when using the transmitter for the first time, the
bike recognition switch must be set to either BIKE 1 or BIKE 2.
Only then will the automatic bike recognition work.
See Setting the transmitter on page 20.
M6
69