SATO CL612e Service Manual page 189

Section 9. Optional Accessories
PCMCIA Memory Expansion Installation
REMOVE (2) SCREWS,
NUTS AND STANDOFFS.
THIS HARDWARE WILL BE
MOUNTED ON THE MAIN
PCB BOARD
(STEP 3)
Fig. 9-20
CONNECTOR TO MAIN
PCB BOARD
REMOVE (2) SCREWS
AND WASHERS FROM THIS
END OF STANDOFFS
(STEP 4)
CONNECTOR TO
HOLES FOR
MEMORY BOARD
MOUNTING
HOLES FOR Fig. 9-21
MOUNTING
MAIN PCB BOARD SHOWING WHERE THE
MEMORY BOARD WILL BE INSTALLED
Page 9-17
PN 9001079
SATO CL608e/CL612e Service Manual
Rev. B