Print Darkness Adjustment - SATO CL612e Service Manual

Section 4. Electric Checks and Adjustments

4.12 Print Darkness Adjustment

STEP PROCEDURE
1. Turn VR1 potentiometer (located underneath a flip-down cover ot the
front panel) to the center postion.
2. Turn ON the power. Press the LINE key to go off-line. Then press
LINE and .EED keys simultaneously and the following message will
display.
3. Press LINE key and place the cursor under the print darkness desired,
then press the .EED key to enter.
4. Turn O.. the power.
5. Check the print darkness and adjust to suit with VR1.
Page 4-16
POTENTIOMETERS ARE LOCATED
UNDERNEATH A FLIP - DOWN COVER
ON THE FRONT PANEL
SATO CL608e/CL612e Service Manual
print darkness
1(L) 2(M) 3(D)
VR1
PN 9001079
Rev. B