SATO CL612e Service Manual page 128

Section 6. Replacement Procedures
Replacing the Platen
DISPLACE PLATEN BY
PULLING UP AND
AWAY FROM HOLDING
CLAMP
Fig. 6-36
PULL PLATEN
THROUGH HOLE IN
FRAME AND OUT THE
ELECTRONICS
COMPARTMENT
HOLDING CLAMP
WITH HEAD RELEASE
Fig. 6-37
LEVER REMOVED
FOR CLARITY AND
SHOWING THE
SPRING IN CORRECT
HOLDING CLAMP
BUSHING PLATE
POSITION
WITH HEAD RELEASE
LEVER IN PLACE
SPRING END MUST
NOT BE UNDER
BUSHING PLATE
Fig. 6-38
Fig. 6-39
Page 6-22
SATO CL608e/CL612e Service Manual PN 9001079
Rev. B