General Settings - Psm - JVC KD-BT11 Instructions Manual

Preset value setting for each sound mode
Sound
BASS (bass)
mode
Freq.
USER 60 Hz
ROCK 100 Hz
CLASSIC 80 Hz
POPS 100 Hz
HIP HOP 60 Hz
JAZZ 80 Hz
Freq.: Frequency Q: Quality slope
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on pages 25 and 26.
1
Enter the PSM settings.
2
Select a PSM item.
Indications Item
(
DEMO • DEMO ON
Display
demonstration • DEMO OFF
CLOCK DISP *
1 • CLOCK ON
Clock display
• CLOCK OFF
CLOCK HOUR 0 – 23
Hour adjustment (1 – 12)
CLOCK MIN 00 – 59
Minute adjustment
24
MID (mid-range)
Level Q Freq.
00 Q1.25 1.0 kHz
+03 Q1.0 1.0 kHz
+01 Q1.25 1.0 kHz
+02 Q1.25 1.0 kHz
+04 Q1.0 1.0 kHz
+03 Q1.25 1.0 kHz
Setting, [reference page]
: Initial)
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [4].
: Cancels.
: The clock time is always shown on the display when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [4].
[Initial: 0 (0:00)], [4].
[Initial: 00 (0:00)], [4].
Preset value
TRE (treble)
Level Q Freq.
00 Q1.25 10.0 kHz
00 Q1.25 10.0 kHz
00 Q1.25 10.0 kHz
+01 Q1.25 10.0 kHz
–02 Q1.0 10.0 kHz
00 Q1.25 10.0 kHz
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
LOUD
(loudness)
Level Q
00
+02
+03
Fix OFF
+02
+01
+03