General Settings - Psm - JVC KD-BT11 Instructions Manual

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and pages 21.
1
Enter the PSM settings.
2
Select a PSM item.
Indications Item
(
DEMO • DEMO ON
Display
demonstration • DEMO OFF
CLOCK DISP *
1 • CLOCK ON
Clock display
• CLOCK OFF
CLOCK HOUR 0 – 23
Hour adjustment (1 – 12)
CLOCK MIN 00 – 59
Minute adjustment
24H/12H • 12 HOUR
Time display mode • 24 HOUR
CLOCK ADJ *
2 • AUTO
Clock adjustment
• OFF
AF-REG * 2 • AF
Alternative
frequency/
regionalization
reception • AF-REG
• AF OFF
20
Setting, [reference page]
: Initial)
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [4].
: Cancels.
: The clock time is always shown on the display when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [4].
[Initial: 0 (0:00)], [4].
[Initial: 00 (0:00)], [4].
: See also page 4 for setting.
: The built-in clock is automatically adjusted using the clock data
provided via the satellite radio channel.
: Cancels.
: When the currently received signals become weak, the unit switches
to another station (the programme may differ from the one
currently received), [9].
• The AF indicator lights up.
: When the currently received signals become weak, the unit switches
to another station broadcasting the same programme.
• The AF and REG indicators light up.
: Cancels.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.