JVC KD-BT11 Instructions Manual page 112

Indications Item
(
SCROLL * • ONCE
5
Scroll • AUTO
• OFF
L/O MODE • REAR
Line output mode
• SUB.W
SUB.W FREQ * • LOW
6
Subwoofer cutoff • MID
frequency • HIGH
SUB.W PHASE *
6 • 180 DEG
Subwoofer phase • 0 DEG
EXT INPUT *
7 • CHANGER
External input • EXT INPUT
TAG DISPLAY • TAG ON
Tag display • TAG OFF
AMP GAIN • LOW POWER
Amplifier gain
control • HIGH POWER
IF BAND • AUTO
Intermediate
frequency band • WIDE
*
5 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* Displayed only when "L/O MODE" is set to "SUB.W."
6
*
7 Displayed only when one of the following sources is selected—FM, AM, DAB, CD, BLUETOOTH, AUX IN.
26
Setting, [reference page]
: Initial)
: Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
: Select if the REAR LINE OUT terminals are used for connecting the rear
speakers (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for connecting a
subwoofer (through an external amplifier).
: Frequencies lower than 90 Hz are sent to the subwoofer.
: Frequencies lower than 135 Hz are sent to the subwoofer.
: Frequencies lower than 180 Hz are sent to the subwoofer.
: Select either "0 DEG" or "180 DEG" which reproduces a better sound.
: To connect a JVC CD changer, [16], or an Apple iPod, [17].
: To connect portable audio player to the CD changer jack, [20].
: Shows the Tag information while playing MP3/WMA tracks.
: Cancels.
: VOLUME 00 – VOLUME 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speaker.)
: VOLUME 00 – VOLUME 50
: Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.