General Settings - Psm - JVC KD-DV6201 Instructions Manual

Adjusting the sound
1
2
Adjust the level.
1 (fader)
FAD*
Adjust the front and rear speaker
balance.
(balance)
BAL
Adjust the left and right speaker
balance.
(loudness)
LOUD
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
2 (subwoofer)
SUB.W*
Adjust subwoofer output level.
3 (volume adjust)
VOL.A*
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
(volume)
VOL
Adjust the volume.
1
* If you are using a two-speaker system, set the
fader level to "00."
2
* This takes effect only when a subwoofer is
connected.
3
* You cannot make an adjustment for FM.
"FIX" appears.
* 4 Depending on the amplifier gain control
setting. (See page 30 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM settings.
2
Select a PSM item.
R06 to F06
3
Select or adjust the selected PSM item.
L06 to R06
LOUD ON or
LOUD OFF
4
Repeat steps 2 and 3 to adjust other
PSM items if necessary.
00 to 08
5
Finish the procedure.
–05 to +05
00 to 30
(or 50) 4
*
28