More About This Unit - JVC KD-BT11 Instructions Manual

Table of Contents

Advertisement

More about this unit

Basic operations
Turning on the power
• By pressing SRC on the unit, you can also turn on the
power. If the source is ready, playback also starts.
Turning off the power
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
FM/AM/RDS
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in No. 1 will
be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
FM RDS operations
• Network-Tracking Reception requires two types of
RDS signals—PI (Programme Identification) and AF
(Alternative Frequency) to work correctly. Without
receiving these data correctly, Network-Tracking
Reception will not operate correctly.
• If a Traffic Announcement is received by TA Standby
Reception, the volume level automatically changes
to the preset level (TA VOLUME) if the current level is
lower than the preset level.
• When Alternative Frequency Reception is activated
(with AF selected), Network-Tracking Reception is
also activated automatically.
• If you want to know more about RDS, visit
<http://www.rds.org.uk>.
Disc operations
Caution for DualDisc playback
• The Non-DVD side of a "DualDisc" does not comply
with the "Compact Disc Digital Audio" standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs
(Rewritable) in audio CD (CD-DA), MP3 and WMA
formats.
• When a disc is inserted upside down, "PLEASE" and
"EJECT" appear alternately on the display. Press
eject the disc.
• In this manual, words "track" and "file" are
interchangeably used.
• While fast-forwarding or reversing on an MP3 or
WMA disc, you can only hear intermittent sounds.
• If you change the source while listening to a disc,
playback stops.
Next time you select "CD" as the playback source,
playback will start from where it had been stopped
previously.
• After ejecting a disc, "NO DISC" appears and you
cannot operate some of the buttons. Insert another
disc or press SRC to select another playback source.
• If the ejected disc is not removed within 15 seconds,
it is automatically inserted into the loading slot again
to protect it from dust. Playback starts automatically.
0
Continued on the next page
REFERENCES
23
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents