Listening To The Radio - JVC KD-BT11 Instructions Manual

Hide thumbs Also See for KD-BT11:
Table of Contents

Advertisement

Listening to the radio

1
Select "FM/AM."
2
Select the bands.
3
Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until "M" flashes on the display, then press
it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, "ST" lights up
When an FM stereo broadcast is
hard to receive
Reception improves, but stereo effect will be lost.
• "MO" lights up on the display.
To restore the stereo effect, repeat the same
procedure. "MONO OFF" appears and "MO" goes off.
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1
While listening to an FM station...
2
Local FM stations with the strongest signals are
searched and stored automatically in the selected FM
band.
8
on the display.
Manual presetting
Ex.: Storing FM station of 92.50MHz into preset number
4 of the FM1 band.
1
2
3
Preset number flashes for a while.
To listen to a preset station
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents