Cleaning The Intake Area - Farymann Diesel 15B Series Operator's Manual

Maintenance for special conditions
Pos: 8.14 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473
Pos: 8.15 /KN2006-Projekte/Bukh-Farymann/Wartung/1.1 Ansaugbereich reinigen 6415 @ 54\mod_1196762968178_2.doc @ 873781

8.3 Cleaning the intake area

Fig. 39
2008-09-08
CAUTION!
Reduced maintenance intervals in the case of
special conditions!
Additional maintenance is necessary in the case of
special operating conditions in order to maintain
the lifetime of the engine.
Therefore:
– Observe the following points.
Excessive occurrence of dust
In the case of use where there is an excessive occurrence of
dust, the maintenance intervals must be at least halved.
Low operating time
In the case of low operating time, the engine oil and oil filter
must be replaced at least every 12 months irrespective of the
actual operating hours.
CAUTION!
Engine damage due to dust in the intake area!
Dust in the combustion chamber can result in
premature engine wear and reduced engine
performance.
Therefore:
– Keep the area for the intake air free of dust and
contamination.
Clean dust and contamination in the intake area (1) with a
suitable clean and dry cloth.
Diesel engine Series 15B / 18B
Maintenance
65