Fig. 35
Fig. 36
Pos: 7.21 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473
2008-09-08
CAUTION!
Engine damage due to cold start aids!
The use of cold starting aid results in engine
damage.
Therefore:
– Never use cold starting aids.
The engine in the version with a starter is started using a key
switch (see e.g. operating instructions of the device manufacturer).
Example of the key switch positions:
0 Electrical system switched off. Key can be removed.
I
Electrical system switched on.
Operating position
II Electrical system switched on.
Starting position
Starting engine
1.
If the engine is cold, put the speed adjustment lever (1) in the
increased idle speed position (3).
If the engine is warm, put the speed adjustment lever in the
position (2) (depending on the application of the engine).
2.
Turn key e.g. to position I. Any existing indicator lamps from
the machine must light afterwards (e.g. oil check, battery
charge check, etc.).
3.
Press in the key, turn as far as position II and release
immediately after the engine starts.
NOTE!
If the engine does not start, the battery voltage can
be too low. Charge the battery or replace it if
necessary.
Diesel engine Series 15B / 18B
Operation
55