Starting With Electric Starter - Farymann Diesel 15B Series Operator's Manual

Diesel engine Series 15B / 18B
Operation
Pos: 7.19 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473
Pos: 7.20 /KN2006-Projekte/Bukh-Farymann/Bedienung/1.1 Starten mit elektrischen Anlasser 6415 @ 54\mod_1196698229608_2.doc @ 836658

7.4 Starting with electric starter

54
NOTE!
The automatic decompression operates for the
manual starting of the engine. If the pin has moved
to the operating position (fig. 29/3), the
decompression is finished. The compression
begins and the engine starts.
8. Absolutely continue turning after the first compression until the
crank handle is overtaken by the running engine and
disengaged.
NOTE!
If the engine does not start, repeat the starting
procedure (continuous cranking at a steadily
increasing speed will help starting) and
increase the speed.
NOTE!
When starting the engine when warm
(operating temperature) do not pull out the
excess fuel device.
NOTE!
For engines with an electric starter the
automatic compression does not need to be
activated. The engine is started with e.g. a key
switch.
CAUTION!
Damage due to starting while the engine is
running!
Incorrect operation of the starter can damage it.
Therefore:
– Only operate the starter when the engine is not
running.
– Do not operate the starter for longer than 10 to
20 seconds and release the key when the
engine is running.
– Wait approx. 30 seconds before repeating
starting.
2008-09-08