Operation - Farymann Diesel 15B Series Operator's Manual

Diesel engine Series 15B / 18B

Operation

Pos: 7.22 /KN2006-Projekte/Bukh-Farymann/Bedienung/1.1 Betrieb @ 45\mod_1188111341864_2.doc @ 570294
7.5 Operation
First use
56
CAUTION!
Engine damage due to incorrect operation!
The lifetime of the engine can be reduced due to
incorrect operation.
Therefore:
– Strictly observe the following instructions for first
use, normal operation and continuous
operation.
CAUTION!
Engine damage due to cold start aids!
The use of cold starting aid results in engine
damage.
Therefore:
– Never use cold starting aids.
WARNING!
Risk of injury due to leaking fuel!
Fuel escaping from the injection system can
penetrate the skin and eyes due to the high
pressure and cause severe injuries.
Therefore:
– Wear safety goggles during first use and check
the fuel system for leak tightness.
– If fuel escapes, switch off the engine and
contact the nearest Greaves Farymann Diesel
service partner.
Let the engine warm up for approx. 5 minutes after starting.
Increase load slowly.
After the first 25 operating hours, carry out the following
work in accordance with the maintenance work:
Change the engine oil and replace oil filter (see Chapter 8.6
Changing engine oil and oil filter).
Arrange for the valve clearance to be checked by the
nearest Greaves Farymann Diesel service partner (see
Chapter 8.10 Adjusting valve clearance).
2008-09-08