Supply Voltage; Output; Supply Voltage For Additional Units - HBM ME50S6 Operating Manual

10

2.2 Supply Voltage

+14.5...+15.5 V (max.70 mA) . . . . . . . . . . . . .
−14.5...−15.5 V (max.65 mA) . . . . . . . . . . . . . .
operating voltage zero . . . . . . . . . . . . . . . . . . .
The ripple on the supply voltage should not exceed 0.1 V peak-to-peak. The
supply connections are internally protected against reverse polarity. Single
sided connection of the supply voltage should be avoided. The supply voltage
should be kept as low as possible within the permissible range of
"15.6..."25 V in order to maintain the dissipation at a low value.
If a stabilized voltage is not available, the measuring amplifier can be oper-
ated by means of a stabilized power supply or a DC-DC converter (see chap-
ter 5.1 and 5.2).

2.3 Output

Output voltage: "10 V; R
Operating voltage zero . . . . . . . . . . . . . . . . . . .
The output is provided for the connection of a display and/or recorders. A cur-
rent output can be generated optionally (see chapter 5.3).

2.4 Supply Voltage for Additional Units

Stabilised voltages are available for supplying additional units:
+14.5V...+15.5 V; <50 mA . . . . . . . . . . . . . . . .
−14.5V...−15.5 V; <50 mA . . . . . . . . . . . . . . . .
operating voltage zero . . . . . . . . . . . . . . . . . . .
HBM
≥5 kΩ . . . . . . . . . .
L
pin15a
pin16a
pin19c
pin18c
pin20a
pin6c
pin7a
pin15c
ME50S6
+
−
±
+
−
A0260−3.0 en/de/fr